Free Shipping on All Orders $50+
Delivery & Return:Free shipping on all orders over $50
Estimated Delivery:7-15 days international
People:22 people viewing this product right now!
Easy Returns:Enjoy hassle-free returns within 30 days!
Payment:Secure checkout
SKU:24112424
Fast shipping with DHL Note:This item only support 220V Feature and operation: 1. The initial set temperature settings: COASTS equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat's normal function,By using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40 °C 2. COASTS thermostat operation is fully automated, clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature 3. The thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If cold water is started, will be 6 ~ 8 °C / h elevated temperatures 4. Automatic heating: thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on 5. Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off) Parameter: 1.Input voltage:220V 2.Power:3KW 3.Current:13.6A 4.Weight:3.5kg Note: thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installed Package Included: 1 x 220V 3KW SPA Heater
Swimming pool thermostat Voltage: 220V/50Hz ;Power: 3KW
Do not allow any electrical supplies (such as lights, telephones, hair dryer, radio or TV) in the bathtub within 1.5 meters (5 feet). The thermostat shall not be used in brine, acid or alkaline water, nor can it be used in other places with chemical corrosive gases or solvents.
220V 3kW of coasts thermostats are designed to maintain a pre-set temperature level in the standard bath water temperature not exceeding 40 ° C (104 ° F) . However, if the bath is cold during start-up, the coasts thermostat will raise the temperature by 6 to 8 ° C / h depending on the initial water temperature, room temperature and bath size.
Power supply according to the power of the thermostat equipped with the appropriate power cord, the thermostat comes with the 3-pin power cord connected to the terminal near the terminal box, the power supply for the 230V / 50 ~ 60Hz, brown fire line that L terminal, blue The dyed line is the N terminal, and the yellow and green lines are connected to the ground line.
Automatic heating: thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on.
Stay away! Item is defective doesn’t come with connector.
